Scrub Colors Meaning: What Color Scrubs Do Nurses Wear?

Clinicians in navy, ceil and wine showing how hospitals assign scrubs by color

Color-coded scrubs are uniforms in colors assigned by role, so patients and coworkers can tell a nurse from an assistant or a therapist at a glance. US hospitals do not share one scrub color code. Where colors are assigned, the employer’s dress code sets them, so a color carries meaning only inside the facility that chose it.

Published charts show how far apart those choices can be. In two US hospital uniform charts we reviewed, navy was a licensed nurse color at both, but black meant imaging at one and the laboratory at the other. This guide shows uniform managers, and the distributors who supply them, how to build a chart and keep each role color consistent across garments and reorders.

Scrub colors meaning: is there a standard code?

Not one that crosses facility lines. A color scheme sits in an employer’s dress code and applies only to that employer’s staff. Respiratory therapy wore Caribbean blue at both hospitals we checked, but imaging technologists shared that color at one and wore black at the other. Navy for licensed nurses and ceil blue for surgical teams were the clearest overlaps.

Staff who work for two employers may need a set for each dress code, and a distributor serving several facilities must stock each palette. Someone also has to own the chart, keep it current and send it to the supplier with every order.

What color scrubs do nurses wear?

Nurses wear the color their employer’s dress code assigns, so the answer changes from one facility to the next. In both US hospital charts we reviewed, navy was the color for licensed nurses (RN and LPN), and one of them also allowed all white. Assistants were kept in a different color from licensed nurses, and surgical teams wore ceil blue.

Nursing students usually follow the color their school sets, which our guide to student scrub colors covers. If you are choosing nurse colors for a program, the steps below show how to build the chart so the color means the same thing on every unit and every reorder.

What published hospital color charts have in common

The two charts differ in detail but share a structure. Both put many job titles under a smaller set of colors and keep assistants in a different color from licensed nurses. Both also let some licensed professionals, such as pharmacists, wear business attire with a white lab coat instead of scrubs.

Role group Colors in the two charts What to take from it
Licensed nurses (RN, LPN) Navy at both; one also allows all white The closest thing to a shared choice
Patient care assistants Burgundy at one, pewter (dark gray) at the other Kept apart from the nurse color
Techs, unit secretaries, medical assistants Pewter with the assistants at one; varies by unit at the other Decide early whether techs share the assistant color
Lab and imaging Teal, purple and black at one; black and Caribbean blue at the other Black appears at both, for different departments
Therapists and pharmacists Caribbean blue for respiratory therapy at both (one also allows black); business attire or business casual with a white coat for pharmacists at both A lab coat option means fewer scrub colors
Surgical services Ceil blue at both; one also allows the hospital’s green surgical scrubs Theater teams follow their own rule
Support services Purple or lavender for environmental services at both, with polos or logo shirts for several non-clinical teams Not every team needs a scrub color

The table covers two hospitals, so it shows patterns and sets no standard. Care homes and agencies that color-code face the same choice for nursing assistants, and our page on CNA and caregiver scrubs covers role colors in that setting.

Color by role or color by department

Color by role gives each job group one color across the facility. Color by department gives each unit its own color, whoever works there. The choice changes what patients can read and how much stock you carry.

Question Color by role Color by department
What patients learn One key for the whole building A different key on each unit, and roles within a unit look alike
Float and agency staff One color on every unit A set for each unit they cover
Colors to stock Grows with role groups, which change slowly Grows with every new unit or service line
Team identity Units look mixed Each team has a distinct look

One chart we reviewed assigns colors almost entirely by role. The other sets them by department and position, so the same role can change color between units. Both make surgical services an exception. A sensible default is to color by role, then list each exception and the reason for it. Our page on why operating rooms use blue and green explains the theater colors.

How to build a color chart for your facility

  1. List every job title that wears scrubs, using HR records. Include float pool and agency roles.
  2. Group the titles into the role groups patients need to tell apart. Nursing may need its own split by license level (RN, LPN, nursing assistant); see color coding for nursing roles.
  3. Give each group one color and note the exceptions: facility-provided scrubs, roles allowed a white lab coat, and students. Schools usually set student colors; see how schools choose student scrub colors.
  4. Drop any color that fails the look-alike tests below. Confirm each one left is a stock shade or a custom match your supplier keeps on record.
  5. Write the rules around each color: whether tops and pants must match (one chart requires all navy or all white), and which jackets, underscrubs and prints are allowed.
  6. Send the same version of the chart to HR, unit managers and your supplier.

For each role group, the chart should record:

  • the job titles it covers
  • the color name and the supplier’s code or Pantone reference
  • the garments in that color, from top and pants to jacket, cap and underscrub
  • the embroidery: role title, logo and thread color
  • exceptions, effective date and version

Styles, sizing and budget are covered in our guide to setting up a scrub uniform program, and our hospital-wide uniform programs page covers full facility rollouts.

Make the colors easy to tell apart

Close dark shades need the most care: navy blue scrubs, black and charcoal or pewter gray scrubs can look alike across a room or under night lighting. Light blues blur too, so ceil blue scrub sets and Caribbean blue should not mark two roles on one unit.

The National Eye Institute reports that about 1 in 12 men have a color vision deficiency and that the most common type makes red and green hard to tell apart. Avoid pairs where hue is the only difference, such as burgundy and hunter green.

Color should never be the only cue. Embroider the role title, such as RN or Patient Care Tech, on the chest; our guide to where logos and role titles sit on a scrub top covers placement. Keep name badges too. In California, Business and Professions Code section 680 generally requires health care practitioners to show their name and license status on a name tag in at least 18-point type while working.

Before sign-off, lay every color side by side under ward lighting and night lighting. Then ask a few staff who were not involved to name each role from across a room.

Jackets, caps and layers in the role color

A jacket worn over the top hides the role color. One chart we reviewed requires outerwear in the role color for most roles, with a white lab coat or an approved dark jacket allowed for some. Copy that rule, and set one for underscrubs too: a single neutral color for everyone, or the role color.

Caps need a decision as well. Once the sterile team is gowned, the cap is what stays visible, so decide whether theater caps carry the role color, a role title or neither. Order every layer with the scrubs so all pieces are approved against the same color standard.

Matching role colors across garments and reorders

A role color works only if every navy top, jacket and cap reads as the same navy, this year and next. Set one color standard per role, a physical swatch or a Pantone reference, and record it on the chart.

  • Approve a lab dip, a small piece of the actual fabric dyed to the target shade, for each fabric in the role color. A match on scrub fabric does not confirm a match on jacket or cap fabric.
  • Judge lab dips in daylight and under ward lights. Two fabrics can match under one light and differ under another. This is called metamerism.
  • Reorder against the approved standard, never against a worn garment.
  • Check each delivery against the approved swatch before stock is issued.
  • Ask the supplier to keep color records and patterns on file and to warn you before any fabric change.

Shade options and custom matches are explained in our guide to stock scrub colors and Pantone matching.

Color-coded programs at GoMedWear

GoMedWear makes scrubs, scrub jackets, underscrubs and scrub caps at its own factory in Sialkot, Pakistan. Choose from 30+ stock colors or a Pantone match for a custom role color. On GoMedWear’s own styles the minimum is 50 pieces per style, and colors and sizes can be mixed within those 50, so one style can cover several role colors. Sizes run from XS to 5XL on computer-graded patterns, depending on the style.

Quality steps include lab dips for color, sealed samples and AQL inspection, and color runs and patterns stay on file so reorders match. Role titles and logos are embroidered in-house. Every order starts with a sample, and bulk production takes 15 to 25 days after you approve it. To check fit and shade first, request a free size-set sample.

Frequently asked questions

What color scrubs do nurses wear?

It depends on the employer, because each dress code sets its own colors. Navy is one choice you will see: both US hospital charts we reviewed used it for licensed nurses, and one also allowed all white. Both charts kept assistants in a different color. Check the facility’s uniform policy before you order.

What color scrubs do CNAs and medical assistants wear?

There is no shared answer. In the two hospital charts we reviewed, patient care assistants wore burgundy at one hospital and pewter at the other. The second chart also put medical assistants, unit secretaries and many technicians in pewter. Whatever the color, keep it clearly different from the one licensed nurses wear.

Who wears gray or black scrubs in a hospital?

It varies by facility. In one chart we reviewed, pharmacy techs wore gray, rehab staff wore dark gray and imaging wore black. In the other, pewter covered assistants and technicians, light gray was for advanced practice providers and black was for the laboratory. Read any shade against the facility’s own chart, because it can mean a different role at the next hospital.

How many colors should a color-coded program use?

As few as your role groups need. Start from the groups patients must tell apart, such as licensed nurses, assistants and techs, and therapists. Give each group one color rather than one per job title or unit. Every added color is another stock line to reorder and another pair to check for look-alikes.

Get a Free Sample