Factory-direct · Wholesale · Private label

Quality Control in Our Scrub Factory

How GoMedWear checks scrub quality: fabric GSM on arrival, computer-graded patterns, inline sewing checks, color matched to an approved shade and AQL audit before packing.

LEAD TIME15–25 daysSampling to bulk dispatch
SHIPPINGWorldwideDDP / door-to-door available
CUSTOMIZATIONFull SuiteEmbroidery, DTG, screen & sublimation
MINIMUM ORDERFlexibleStart with 50 pieces per style

Quality in scrubs is not one inspection at the end. It is a set of checks at every stage, from the fabric roll to the sealed carton, so that the bulk order matches the sample you approved and the reorder matches the first order. This page explains how GoMedWear checks fabric, cutting, sewing, color and packing in its own factory in Sialkot, Pakistan, and what you can ask to see as a buyer.

It starts with the approved sample

Every order is measured against one standard: the sample you approved. Before bulk production, you receive a sample in your chosen fabric and color, wear it, wash it and check the fit. Once you approve it, it becomes the sealed sample, and every check that follows compares the bulk garments with it. Reorders reference the same approved standard, so the tenth order is checked against the same garment as the first.

1. Fabric checked on arrival

Worker inspecting navy scrub fabric on an inspection table, coloured rolls behind

Woven and knit fabric is inspected when the rolls arrive and before any cutting starts. Each lot is checked for weight (GSM) against the specification and inspected on the table before it goes to the cutting room. Fabric is pre-shrunk before cutting, so the garment keeps its size after washing.

2. Computer-graded patterns and controlled cutting

Graded paper patterns for an extended-size scrub top in the pattern room

Patterns are graded by computer from XS to 5XL from one base pattern, so a medium fits the same way across styles and a large is consistently one step up from a medium. Fabric is cut in bundles, which keeps sizing consistent across a whole order.

3. One dedicated sewing line, checked at the machine

Sewing line machinists stitching wine scrub tops

Each order runs down one dedicated sewing line of lockstitch and overlock stations, rather than being split across lines. Inline checks happen at the machines while the order is being sewn: workmanship and measurements are compared with the sealed sample, so problems are corrected while the order is still on the line instead of after it is finished.

4. Color matched to an approved standard

Technician comparing a royal blue scrub top to the approved shade card in a light booth

Color is approved before production, through a lab dip or an approved shade for stock colors and Pantone matches. Garments are compared with the approved shade under controlled light, so the comparison does not change with the light in the room. Color runs are kept on file, which is how a reorder months later matches the shade already in your stock.

5. Full audit before packing

Before anything is packed, the finished order goes through a full audit of workmanship and measurements against the sealed sample and size chart. Inspection follows AQL sampling, and the results are documented. If your company needs a specific AQL level or its own inspection before shipment, raise it when you request a quote so it is agreed in writing.

6. Packed and labeled to your instructions

Hands packing poly-bagged navy and teal V-neck scrub tops into a plain carton

Garments are poly-bagged and size-labeled, then packed into cartons to your instructions. Woven labels, care labels and hang tags are applied in the factory, so branding is checked in the same audit as the garment. Orders ship DDP to your door, or FOB Karachi if you use your own forwarder.

Checks at a glance

Stage What is checked Checked against
Fabric arrival Weight (GSM), table inspection, pre-shrinking Fabric specification
Pattern and cutting Computer grading XS–5XL, bundle cutting Base pattern and size chart
Sewing (inline) Workmanship and measurements Sealed sample
Color Shade under controlled light Lab dip or approved shade
Final audit Workmanship and measurements (AQL sampling, documented) Sealed sample and size chart
Packing Poly bags, size labels, cartons Your packing instructions

What you can ask for as a buyer

  • A sample before bulk, in your fabric and color, and a written approval that becomes the sealed sample
  • The fabric composition and GSM on record for your order
  • The size chart used in the final audit
  • The documented inspection result before shipment
  • Your own or a third-party inspection, if your company requires one; raise it at the quote stage

Comparing several factories? Our guide on how to find a scrub manufacturer lists the quality questions to ask any supplier. To see the result in your own hands, request a sample, or read how private label and OEM orders run.

Frequently Asked Questions

How do you make sure bulk production matches the sample?

The approved sample is sealed and used as the standard for inline checks during sewing and for the full audit before packing.

How do you keep colors the same on reorders?

Colors are approved by lab dip or approved shade, checked under controlled light, and the color runs are kept on file for reorders.

Is sizing consistent across styles?

Yes. Patterns are graded by computer from XS to 5XL from one base pattern, and fabric is cut in bundles for consistent sizing.

Do you use AQL inspection?

Yes. Inspection follows AQL sampling and is documented. If you need a specific AQL level, agree it when you request a quote.

Can I send my own inspector?

If your company requires its own or a third-party inspection before shipment, raise it when you request a quote so it can be agreed in writing.

Is the whole order made in your own factory?

Yes. Cutting, sewing, labeling and packing happen in our own factory in Sialkot, Pakistan; nothing is outsourced.

10+ Years manufacturing
40+ Countries served
30+ Stock colors
50+ Units minimum — that's all
Inside the factory

From fabric roll to finished uniform

Every order runs down our own floor — nothing is outsourced — so the fabric, fit and stitching are identical on every reorder.

  1. 01

    Fabric rolls in

    Woven and knit yardage inspected on arrival, GSM-checked and pre-shrunk.

  2. 02

    Precision cutting

    Computer-graded patterns, XS–5XL, cut in bundles for consistent sizing.

  3. 03

    Sewing lines

    Lockstitch and overlock stations run your order down one dedicated line.

  4. 04

    Two-stage QC

    Inline checks at the machine, then a full audit before anything is packed.

  5. 05

    Pack & dispatch

    Poly-bagged, size-labeled and shipped DDP to your door worldwide.

Color range

Pick your shades — 30+ stock colors

Every garment can be produced in the colors below, and we color-match to Pantone for private-label programs. Tap a swatch to copy its name into your inquiry.

Get pricing

Request wholesale pricing for Quality Control in Our Scrub Factory

Tell us what you need and we send factory-direct pricing, the line sheet and samples within one business day.

  • Factory-direct price list & MOQ in one reply
  • Free samples before any bulk run
  • Private-label & custom branding available

Prefer to chat? Message us on WhatsApp →

We reply within one business day. No spam, ever.

Ready to put your brand on it?

Get factory-direct wholesale pricing, and sell at any price you set.

  • Reply within 1 business day
  • Free size-set samples
  • DDP door-to-door worldwide
Get a Free Sample